DaVinci ARTIQ: Battery & Charging
Pros
- Cool vapor through long stainless steel airpath
- Cartridge concealed and protected from UV light
- Around 3 seconds heat-up time
- Pass-through charging via USB-C
- Compact and discreet (150 g)
Cons
- 510-thread cartridges only, no oversized ones
- Three voltage levels, no temperature selection
- No automatic shut-off
- Small battery (around 500 puffs)
- Not suitable for dry herb
- 1 year warranty
Battery & Charging for the ARTIQ. You can find the complete overview on the main page.
Battery & Charging
The battery is built in. DaVinci lists 760 mAh in the specifications and 700 mAh in the feature list. According to the manufacturer, a single charge is sufficient for around 500 draws. Charging is via USB-C, and thanks to passthrough charging, you can use the ARTIQ while it is plugged in.
The LED indicates charging status: red flashing up to 30%, blue flashing up to 60%, green flashing up to 99%, and solid green when fully charged. The ARTIQ has no automatic shut-off. Switch it off yourself after a session, otherwise the battery will drain.
More ARTIQ topics
ARTIQ Guides & Niches
No. The ARTIQ is a vaporizer for 510-thread oil cartridges. It has no chamber for dry herb. For dry herb, DaVinci offers dedicated devices such as the IQ3 or the MIQRO-C.
Most 510-thread cartridges with bottom airflow in sizes 0.3 g, 0.5 g, and 1 g. Oversized cartridges do not fit in the housing.
Three voltage levels: FLAVOR (low, 2.8 V), MIND (medium), and REST (high). There is no temperature selection in degrees Celsius.
According to DaVinci, a single charge is sufficient for around 500 draws. The built-in battery has 760 mAh according to the specifications and can be charged via USB-C, even whilst the device is in use.
No. The ARTIQ remains switched on until you turn it off or the battery runs flat.
Yes, with the separately available 10 mm silicone adapter. It replaces the flat mouthpiece.
The device is not detecting a connection to the cartridge. Check that the collar and cartridge are firmly connected, and clean the connection point and the base of the cartridge to remove any resin residue. A green LED confirms the connection.
Comments
No comments yet. Be the first!
Sign in to comment