Cannabis Hardware CH Single Enail Controller
Pros
- PID control with 5-pin XLR connector
- Available as a 220-volt version
- Available without coil or with 20 mm, flat, or 25 mm axial coil
- Compatible with Flowerpot and TBucket according to the manufacturer
- One year warranty on the controller
Cons
- Without a coil, the device cannot be used – coil sold separately or as a set
- Only 30 days warranty on the coil
- The manufacturer does not specify a temperature range
- Nail or banger and rig not included
Cannabis Hardware CH Single Enail Controller — Price Comparison (1 Shop) 86.82 €–243.10 €
Last updated: 28/09/2026, 4:37 AM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
Specifications
| Specifications | |
|---|---|
| Heating Method | Conduction |
| Device Type | Desktop |
| Brand | Cannabis Hardware |
| Power Source | AC Power |
| Warranty | 1 year |
| Session Mode | Session |
| Temperature Control | Digital |
| Material | Concentrates |
| Thread Type | XLR 5-Pin |
About this vaporizer
CH Single Enail Controller by Cannabis Hardware is a PID controller for e-nails with a 5-pin XLR connection. It is sold without a coil or as a set with a 20 mm XLR coil, flat XLR coil, or 25 mm axial coil, and is available as a 110-volt version for North America and as a 220-volt version. According to the manufacturer, it is compatible with Flowerpot, TBucket, and other e-nail setups. Cannabis Hardware provides a one-year warranty on the controller and a 30-day warranty on the coil.
- PID control with 5-pin XLR connector
- Available as a 220-volt version
- Available without coil or with 20 mm, flat, or 25 mm axial coil
- Compatible with Flowerpot and TBucket according to the manufacturer
- One year warranty on the controller
- Without a coil, the device cannot be used – coil sold separately or as a set
- Only 30 days warranty on the coil
- The manufacturer does not specify a temperature range
- Nail or banger and rig not included
On VapoChecker you can compare current prices from verified shops.
See also: Cannabis Hardware Blaze Pipe · Zenleaf Moab · VMAX Ball Vape · FlowerPot B1
Controller alone or in a set with coil
110 or 220 volts: check before purchasing
Warranty
More Cannabis Hardware Vaporizers 4
Alternatives at a similar price 3
Same device type and a similar price; matching heating methods come first. Size and features may differ.
Spec comparison
 Cannabis Hardware CH Single Enail Controller | ||||
|---|---|---|---|---|
| Price from | 95.58€ · incl. shipping | 228.44€ · incl. shipping | 321.84€ · incl. shipping | N/A |
| Type | Desktop | Butane | Desktop | Ball Vape |
| Heating | Conduction | Conduction | Convection | Hybrid |
| Temperature | N/A | N/A | 343°C | 427°C |
| Heat-up time | N/A | N/A | 180s | 180s |
| Battery | N/A (AC) | Butane | N/A (AC) | N/A (AC) |
| Weight | N/A | N/A | 1750 g | 113 g |
Green = better value
Open in full comparison →That depends on the chosen variant. Cannabis Hardware sells the controller without a coil as well as in a set with a 20 mm XLR coil, a flat XLR coil, or a 25 mm axial coil.
The coil connects via a 5-pin XLR connector.
Yes, in the 220-volt version. The 110-volt version is intended for North America.
Comments
No comments yet. Be the first!
Sign in to comment