Auber Instruments Enail Controller
Pros
- PID control from Auber Instruments — the brand's industrial reputation
- Rotary dial with boost mode for two quickly recalled temperatures
- Auto-shutoff timer powers down after a set time
- Coil selectable in 20/25 mm and flat, on a 5-pin XLR
- Available for both 110 and 220 volts
Cons
- Mains only — always needs a socket, nothing for the road
- Rotary dial with no digital readout: the exact temperature is felt, not read
- The aluminium handle and nail are not always included
- The corded coil on its XLR plug makes the setup bulky
- No battery, no display — deliberately functional over convenient
Auber Instruments Enail Controller — Price Comparison (3 shops) 104–141 €
Last updated: 17/07/2026, 3:31 AM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
Specifications
| Specifications | |
|---|---|
| Heating Method | Conduction |
| Device Type | Desktop |
| Brand | Auber Instruments |
| Power Source | Plug-in |
| Temperature Control | Analog (Dial) |
| Material | Concentrates |
| Replaceable Battery | No |
About this vaporizer
The Auber Enail Controller is a mains-powered control box that heats a titanium or quartz nail electrically instead of with a butane torch. Auber Instruments has built PID controllers for industry for years, and that reputation is why many in the dab scene reach for this brand specifically. Temperature is set with a rotary dial rather than digitally; a boost mode switches quickly between two values, and an auto-shutoff timer powers down after a set time. The heater coil connects on a five-pin XLR plug and is selectable in 20 or 25 millimetres as well as a flat coil. The controller comes for 110 volts (North America) or 220 volts (international). Worth noting when comparing prices: the kit includes the PID unit, power cord and a coil — the aluminium handle and the nail are not always part of it.
- PID control from Auber Instruments — the brand's industrial reputation
- Rotary dial with boost mode for two quickly recalled temperatures
- Auto-shutoff timer powers down after a set time
- Coil selectable in 20/25 mm and flat, on a 5-pin XLR
- Available for both 110 and 220 volts
- Mains only — always needs a socket, nothing for the road
- Rotary dial with no digital readout: the exact temperature is felt, not read
- The aluminium handle and nail are not always included
- The corded coil on its XLR plug makes the setup bulky
- No battery, no display — deliberately functional over convenient
The Auber Enail Controller heats a nail electrically instead of heating it with a butane flame. PID control from Auber Instruments, rotary knob with boost mode, auto shutoff and a coil on the 5-pin XLR connector. On VapoChecker you can find the Auber Controller with daily updated prices from verified shops.
Why Auber Is a Name
Operation: Rotary Knob Instead of Display
Coil, Voltage and What Is Included
Similar Vaporizers 2
Spec comparison
| Enail Controller | XQ2 | |
|---|---|---|
| Type | Desktop | Desktop |
| Heating | Conduction | Convection |
| Temperature | N/A | 50°C - 260°C |
| Heat-up time | N/A | 90s |
| Battery | N/A (AC) | N/A (AC) |
| Price from | 104€ | 130€ |
| Enail Controller | Extreme Q | |
|---|---|---|
| Type | Desktop | Desktop |
| Heating | Conduction | Convection |
| Temperature | N/A | 50°C - 260°C |
| Heat-up time | N/A | 120s |
| Battery | N/A (AC) | N/A (AC) |
| Price from | 104€ | 81€ |
Not necessarily. Included are the PID controller, power cable and one coil; the aluminium handle and the nail are separate depending on the offer.
This variant is operated using a rotary knob, without a digital display in degrees. A boost mode allows two quickly accessible temperatures.
The controller is available for 110 volts (North America) or 220 volts (international). In Europe, the 220-volt version is the correct one.
20-mm, 25-mm or flat coils can be connected via the 5-pin XLR connector — matched to the nail being used.
Comments
No comments yet. Be the first!
Sign in to comment