Only devices with a serial number starting with “M2” are affected (sold 06/2024 to 07/2025). Newer units are unaffected.
Affected devices are replaced free of charge by the manufacturer. Check the serial number on the bottom of the device. If your unit is affected, stop using it and contact the manufacturer.
Arizer Solo 2: Controls & Display
Pros
- Pure glass vapor path
- Passthrough charging
- 1°C temperature increments
Cons
- Glass tubes more fragile than silicone parts
- Larger than compact alternatives
Controls & Display for the Solo 2. You can find the complete overview on the main page.
Controls & Display
OLED display with current and target temperature. Three-button controls: menu, up and down.
Auto shut-off after adjustable time (5 to 15 minutes, default: 10 minutes). No Bluetooth, no app - Arizer keeps it deliberately simple. For more control, look at the Solo 3 V2 with color display and on-demand mode.
Session Workflow in Practice
- Fill the stem: medium grind, loosely packed. Don't tamp down.
- Power on: Hold the up and menu buttons together until the countdown ends. Display shows heat-up phase.
- Inhale: Slow, steady draws over 5-10 seconds.
- Increase temperature: After 3-5 draws, raise by 5-10 °C for more extraction.
- End session: The device shuts off automatically after the set time (10 min by default).
Direct comparisons
Solo 2 Guides & Niches
Frequently asked questions
50 to 220°C in 1-degree steps.
According to Arizer, up to about 3 hours depending on temperature. The battery is built in and not user-replaceable; Arizer offers a replacement service.
Yes. Arizer offers frosted glass aroma tubes with a 14 mm or 19 mm joint for this (sold separately).
The Crafty+ has an app, a bigger chamber and a wider temperature profile. The Solo 2 costs far less and offers purer flavor thanks to its glass airpath; neither has a user-replaceable battery.
USB-C instead of a wall charger.
Soak the aroma tube in isopropyl alcohol (90%+), brush out the chamber. Glass parts can be boiled in hot water.
Comments
No comments yet. Be the first!
Sign in to comment