Pros
- Tuned for Cannabis Hardware systems: Flowerpot, DCup, TBucket, e-nails
- Quick heat-up per the manufacturer
- Single-coil control over a 5-pin XLR
- A one-source match for those already using CH gear
- US power cord included
Cons
- Only 30 days of warranty on the coil — the part that actually wears
- Mains only, no battery — nothing for the road
- US power cord: in Europe an adapter or cable swap is needed
- Tailored to CH systems — less useful outside them
- The corded single-coil build stays bulky to set up
Simrell CH Single Enail Controller — Price Comparison (1 Shop)
Last updated: 01/09/2026, 7:33 PM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
Specifications
| Specifications | |
|---|---|
| Heating Method | Conduction |
| Device Type | Desktop |
| Brand | Simrell |
| Power Source | Plug-in |
| Temperature Control | Digital |
| Material | Concentrates |
| Replaceable Battery | No |
About this vaporizer
The Simrell CH Single Enail Controller is a mains-powered single-coil controller that Simrell offers in collaboration with Cannabis Hardware. It drives a single heater coil through a five-pin XLR plug and is tuned for the ball-vape and e-nail systems from Cannabis Hardware — Flowerpot, DCup, TBucket and classic e-nails all run on it. The maker highlights quick heat-up. Anyone already inside the Cannabis Hardware ecosystem gets the matching controller from one source here. A US power cord is included. The warranty is one year on the controller and 30 days on the coil — so the wear part is only briefly covered. As a pure desktop unit with no battery, the controller needs a socket.
- Tuned for Cannabis Hardware systems: Flowerpot, DCup, TBucket, e-nails
- Quick heat-up per the manufacturer
- Single-coil control over a 5-pin XLR
- A one-source match for those already using CH gear
- US power cord included
- Only 30 days of warranty on the coil — the part that actually wears
- Mains only, no battery — nothing for the road
- US power cord: in Europe an adapter or cable swap is needed
- Tailored to CH systems — less useful outside them
- The corded single-coil build stays bulky to set up
Simrell — Artisanal US Manufacturer of Vaporizers and Cooling Stems Key Takeaways Brand: Simrell Collection — small-batch manufacturer from Ohio, USA, with in-house production and direct-to-consumer sales via…
Simrell →The Simrell CH Single Enail Controller is a single-coil controller from the collaboration between Simrell and Cannabis Hardware — tuned for Flowerpot, DCup, TBucket and E-Nails, with fast heat-up and 5-Pin-XLR. On VapoChecker you can find the controller with daily updated prices from verified shops.
See also: Simrell Hyper 9 · Simrell Heritage · Simrell Hydro
Controller for the Cannabis Hardware ecosystem
Single coil and XLR standard
Warranty and the sore point
More Simrell Vaporizers 3
Similar Vaporizers 2
Spec comparison
| CH Single Enail Controller | Simrell MVS (Modular Vortex System) | |
|---|---|---|
| Type | Desktop | Butane |
| Heating | Conduction | Conduction |
| Temperature | N/A | N/A |
| Heat-up time | N/A | N/A |
| Battery | N/A (AC) | Butane |
| Price from | 93.98€ · incl. shipping | 150.95€ · incl. shipping |
| CH Single Enail Controller | Extreme Q | |
|---|---|---|
| Type | Desktop | Desktop |
| Heating | Conduction | Convection |
| Temperature | N/A | 50°C - 260°C |
| Heat-up time | N/A | 100s |
| Battery | N/A (AC) | N/A (AC) |
| Price from | 93.98€ · incl. shipping | 138.01€ · incl. shipping |
It is tuned for the Cannabis Hardware systems: Flowerpot, DCup, TBucket and classic E-Nails. Other common E-Nail coils also fit via the 5-Pin-XLR standard.
One year on the controller and 30 days on the coil. The coil is a wear part and is bought again with frequent use.
A US mains cable is included. In Europe, an adapter or cable replacement is required for this.
A single-coil controller: it powers a single heating coil via the five-pin XLR connection.
Comments
No comments yet. Be the first!
Sign in to comment