3-in-1 Glass WPA for Tinymight 2 (Generic)

This water pipe adapter is a generic glass part for the TinyMight 2. It is made from borosilicate glass and has a joint that fits connections of 10, 14, and 18 mm. This allows the vaporizer to be connected to almost any water pipe or bubbler. According to the retailer, the adapter is 9 cm tall and weighs 11.2 g. It is therefore small and light, which keeps the lever at the joint low when mounted on a water pipe. The device does not sit too far above the connection. The vapour is cooled by the water before it is inhaled. This makes the draws smoother, which is particularly pleasant at higher temperatures. Borosilicate glass does not impart any flavour to the vapour and handles heat well. The triple joint is practical if you own several water pipes with different connections. However, an adapter made for exactly one size usually fits somewhat more precisely. Additionally, glass can break if the device tips off the water pipe, so a stable base is important. The adapter is cleaned with isopropyl alcohol and then rinsed with water. It is of interest to owners of a TinyMight 2 who are looking for an affordable glass adapter for various water pipes and do not need a branded part.