DynaVap Buying Guide 2026: All Models

TL;DR

DynaVap currently sells around 13 different models. That sounds like a lot, and it is. Prices range from 30 EUR to 200 EUR. In this buying guide, we explain every single model, tell you honestly what the differences are and which DynaVap suits your budget and usage. All prices are updated daily from 77 shops in 23 countries.

Introduction

DynaVap is a brand from Stoughton, Wisconsin (USA), which has been making butane vaporisers since 2015. The principle: a small metal device is heated with a jet-flame lighter, an audible click signals the correct temperature, and you inhale the vapor. No electronics, no battery, no app.

What distinguishes DynaVap from other butane vaporisers is the sheer variety of models. While Sticky Brick offers four variants and Vapman three, DynaVap now has more than a dozen active products in its range. That is both a blessing and a curse. A blessing because there is something for every taste. A curse because the differences are not obvious at first glance.

That is precisely where this buying guide comes in. We go through the range model by model — from the cheapest entry-level option to the titanium flagship device.

The DynaVap system explained

Before we compare the individual models, you need to understand how a DynaVap is constructed. All models are based on the same modular principle.

Four components:

1. Tip: The herb chamber in which your material is vaporised. There are stainless-steel tips and titanium tips. The tip largely determines the vapor quality.
2. Cap: Sits on the tip. Contains a bimetallic disc that snaps at approximately 200 °C and produces the click. The functional heart of every DynaVap.
3. Condenser: A metal tube inside the stem that cools the vapor and collects condensation.
4. Stem: The outer shell. This is where the models differ most — stainless steel, silicone, glass, wood or titanium.

The click system: The bimetallic disc in the cap deforms when heated. As soon as the vaporisation temperature is reached, there is an audible click. It clicks again as it cools — the signal that you can heat it again. Simple, reliable and proven over many years.

Modular construction: All parts are compatible with one another. You can fit a titanium tip to a wooden stem, put a new cap on an old model or install a longer condenser. This makes DynaVap a modular system.

Airport (Carb Hole): Most models have a small hole in the stem that you can cover or uncover with your finger. Open: less draw resistance, cooler vapor. Closed: denser, warmer vapor. Controlling it quickly becomes intuitive.

Compatibility with induction heaters: Every DynaVap model also works with induction heaters (IH). Instead of using a lighter, you insert the tip into a magnetic coil that heats it electrically. Same click, no flame. Convenient for use at home.

Budget models (30–55 EUR)

The B

The cheapest entry point into the world of DynaVap. The body is made of silicone with a stainless-steel tip and cap. Priced at 30–40 EUR.

What do you get? A fully functional DynaVap with a click mechanism whose vapor performance is on a par with considerably more expensive models. The silicone stem has an anti-roll shape — it sounds trivial, but is genuinely useful in everyday life. The vapor quality is solid, though not outstanding. The short vapor path means warmer vapor than with the M7.

Who it is for: People who want to try DynaVap without risking much money. If you like the principle, you can always upgrade to a better stem later — you keep the tip and cap.

The B2

The 2025 evolution of the B. The most important difference: the vapor path is now made entirely of stainless steel rather than silicone. This noticeably improves the flavour. Price: 35–50 EUR.

The silicone stem remains as the outer shell, but your vapor now touches only metal on its way to your lips. For an additional 5–10 EUR over the original B, this is a worthwhile upgrade. The build quality is also slightly better.

Who it is for: Budget buyers who do not want to compromise on flavour quality. The B2 currently offers the best value for money in the entire DynaVap range.

G3

Glass meets DynaVap. The G3 has a borosilicate glass stem that gives the vapor an exceptionally pure flavour. Price: 40–55 EUR. A torch lighter is often included.

Glass as a material has one decisive advantage: there is no metallic aftertaste. The G3 produces the cleanest vapor of all the budget models. The drawback is obvious — glass is fragile. Drop it onto tiles and the stem is finished. The tip and cap will, of course, survive.

Who it is for: Flavour purists on a small budget. Anyone who mainly uses their DynaVap at home rather than constantly on the go gets excellent vapor here for little money.

Mid-range (70–130 EUR)

M7

The standard model. The DynaVap that most people buy and that most people think of when someone says “DynaVap”. Price: 70–80 EUR.

The M7 was launched in 2024 and comes with six airflow settings. You turn the stem and choose between open and restricted airflow. Open is ideal for beginners: less draw resistance, cooler vapor. Closed is for experienced users: denser, more intense vapor. There is also the Adjust-a-Bowl function — half a click on the tip reduces the herb chamber to roughly half its size. Perfect for microdosing with approximately 0.05 g instead of the full 0.1 g.

The device, made entirely of stainless steel, is robustly constructed. You can drop it, forget it in your trouser pocket or scrub it with isopropyl alcohol. It can take it.

Who it is for: Beginners who want a solid all-rounder. The M7 is forgiving of beginners’ heating mistakes, offers enough flexibility for different styles of use and does not cost the earth.

M7 XL

Identical to the M7, but with a longer stem. Price: 80–90 EUR.

Direct comparison: M7 vs M7 XL — all the differences.

The longer vapor path noticeably cools the vapor. Anyone who finds the regular M7 too warm or has sensitive airways should choose the XL variant. People with large hands also prefer the longer device — it simply feels better in the hand.

All the M7’s features are identical: six airflow settings, Adjust-a-Bowl, same tip. The only difference is the length.

Who it is for: People interested in the M7 who prefer cooler vapor or have large hands. The additional 10 EUR is fair.

M Plus

The mid-range upgrade with a fundamentally different tip design. Price: 85–100 EUR.

The M Plus does away with the fins on the tip. These ribs, which store and evenly distribute heat on the M7, are entirely absent here. As a result, the heat reaches your material more quickly and directly. Heat-up time drops to under 10 seconds. The herb chamber is 15 % larger than on the M7.

The result: denser vapor, more aggressive extraction, often in a single session instead of several cycles. That sounds better at first, but there is a catch. Without fins, the heating process is less forgiving. If you hold the flame too close or for too long, the extraction will be uneven. The M Plus rewards good technique and punishes poor technique.

Who it is for: Experienced DynaVap users who want maximum vapor production per draw. Not ideal as a first device.

VonG / VonG X

DynaVap for water-pipe users. The VonG range combines a wooden stem with an integrated 10/14-mm glass adapter. You insert the VonG directly into your bong or bubbler — without an additional adapter. Price: 90–120 EUR.

The wooden stem not only looks good but also feels pleasantly warm in the hand. The VonG X is the longer variant with an extended vapor path. Both models can, of course, also be used without a water pipe, but then their main advantage is lost.

The water filters and cools the vapor. DynaVap plus water is a combination that many users describe as the best way to use a DynaVap. Larger draws, smoother vapor, less irritation that causes coughing.

Who it is for: Anyone who already owns a bong or bubbler and wants to connect their DynaVap to it. They are also the most attractive DynaVaps in the range.

WoodWynd

Wood meets titanium. The WoodWynd combines a handcrafted wooden stem with a titanium condenser. The result is a DynaVap that feels like a small tool in the hand — warm, light and high-quality. Price: 110–130 EUR.

Titanium as a condenser material has a practical advantage: it is lighter than stainless steel and conducts heat differently. The vapor is slightly cooler and cleaner in flavour. Together with the wooden stem, this creates a combination that is particularly popular among DynaVap collectors.

The WoodWynd is offered in limited-edition wood species. Cocobolo, wenge or other fine woods vary according to availability. This makes each example somewhat unique.

Who it is for: Collectors and enthusiasts who want a DynaVap with character. Functionally, it is not a major step up from the M7, but it is considerably more pleasant to use.

Premium models (150–200 EUR)

HyperDyn

The vapor monster. The HyperDyn is made entirely of titanium and has an oversized herb chamber that holds up to 0.25 g. That is more than twice as much as the M7. Price: 150–180 EUR.

The rough surface of the tip increases the contact area between the metal and the material. This makes extraction more efficient. A single draw from the HyperDyn delivers more vapor than two full cycles with an M7. The device is clearly aimed at experienced users who consume large amounts or use the DynaVap as their main device.

As a material, titanium is not only lighter than stainless steel but also heats up and cools down more quickly. This shortens the waiting time between cycles. The build quality is on another level compared with the budget models — you notice it immediately.

Who it is for: Power users who want maximum output. Also of interest to people who want to fill it just once in the evening and then be done. Not suitable for microdosing.

UniDyn

The odd one out in the range. While all other DynaVaps use conduction (contact heat), the UniDyn uses convection. The material is vaporised not by hot metal, but by hot air. Price: 170–200 EUR.

The UniDyn is a titanium unibody — the stem, condenser and tip are made from a single piece. The modular system therefore does not apply here. Instead, the UniDyn comes with the BallR-Cap, a special cap with integrated beads that create turbulence and preheat the air.

Convection means purer flavour and more even extraction, but also requires a different heating technique. You must draw air through the material while heating it. This feels different from using a normal DynaVap and takes some getting used to.

Who it is for: Experienced vaporiser users who appreciate convection and are prepared to learn a different technique. The UniDyn is the best-tasting DynaVap — but also the most demanding.

All DynaVap models compared

Tip: You can find current prices for all models at vapochecker.com — with daily updates from 77 shops in 23 countries.

Which DynaVap for which user?

The variety of models can be overwhelming. Here is the short version:

Are you a beginner who just wants to get started? Choose the M7. Six airflow settings, Adjust-a-Bowl, forgiving. The standard model is the bestseller for good reason.

Do you want to spend as little as possible? The B2 offers an astonishing amount for 35–50 EUR. Stainless-steel vapor path, functional click, everything you need. Alternatively, choose the G3 if flavour matters more to you than durability.

Are you looking for the best flavour? The G3 delivers the cleanest vapor in the budget range. From 110 EUR, the WoodWynd strikes the same chord with wood and titanium, but feels more premium. And anyone prepared to learn a new technique will get the best flavour experience in the entire range with the UniDyn.

Do you have a bong or bubbler? The VonG was built specifically for that. Insert, heat, draw. No adapter required.

Do you want to microdose? Use the M7 with the Adjust-a-Bowl set halfway. Around 0,05 g per load—it is hard to be more economical. The half-bowl setting reliably reduces the herb chamber.

Do you want the maximum amount of vapor per draw? HyperDyn. Full stop. The 0,25-g herb chamber and titanium design deliver more vapor than any other DynaVap.

Are you interested in convection rather than conduction? Then the UniDyn is your only option. It is the only DynaVap with genuine convection heating and a BallR-Cap. Other convection alternatives include Sticky Brick or Lotus, but they are not DynaVaps.

Do you want an upgrade for your existing DynaVap? Do not buy a new DynaVap. Buy a titanium tip. For 30–40 EUR, you get faster heating, better flavour and less weight. It fits every model with a standard stem.

Price history

Conclusion

DynaVap offers a suitable model for virtually every budget and usage style. The M7 remains the best entry point and is still hard to beat even after years in the range. Those who want to save money should choose the B2. Those who want more can move up to the HyperDyn or UniDyn.

The modular system makes the decision somewhat less final than with electronic vaporizers. The tip, cap and condenser can be replaced at any time. You are not tied to one model and can adapt your setup over time.

One final note: Prices sometimes vary considerably depending on the shop and country. An M7 costs 65 EUR in some shops and 85 EUR in others. Before buying, it is worth checking vapochecker.com — prices there are updated daily from 77 shops.