Arizer Solo 3 V2 Vaporizer 1/6
Arizer Solo 3 V2 Vaporisateur photo produit
Arizer Solo 3 V2 vue laterale
Arizer Solo 3 V2 vue detaillee
Arizer Solo 3 V2 gros plan
Arizer Solo 3 V2 contenu du coffret
Arizer Solo 3 V2 accessoires

Arizer Solo 3 V2: Microdosage

Arizer
Intermédiaires Session On-Demand Portable Microdosage
Meilleur Prix
120,54
€
Disponible chez 15 boutiques
Mes alertes
Notification gratuite en cas de baisse de prix

Avantages

  • Batterie 5000 mAh dure plus longtemps que les modèles concurrents
  • Garantie à vie, batterie remplaçable
  • Temps de préchauffage de 15 secondes pour une utilisation rapide
  • Compatible avec narguilé et contrôle par application

Inconvénients

  • Poids de 210g plus lourd dans le segment portable
  • Plage de 50–220°C nécessite une gestion de la température
  • Chauffage hybride non optimal pour les grandes quantités

Microdosage pour le Solo 3 V2. Vous trouverez la vue d ensemble complete sur la page principale.

Retour a la page principale du Solo 3 V2

Microdosage

Microdosage est un sujet pratique central pour le Solo 3 V2. Gardez un profil de base stable avec température et flux d'air fixes, puis modifiez un seul paramètre par session.

Une routine simple de contrôle de l'inhalation, du remplissage de la chambre et du nettoyage apporte des résultats plus constants.

  • Commencer avec un profil répétable.
  • Changer une seule variable à la fois.
  • Suivre goût, densité de vapeur et durée.
  • Nettoyer régulièrement le chemin de vapeur et les joints.
Test Arizer Solo 3 V2 2026Nettoyage, capsules, batterie, qualité de vapeur — tout en détail. Lire le test complet →
← Retour à l'Aperçu
How long is the Solo 3 heat-up time? +

The Solo 3 heats up in 5-15 seconds, depending on the target temperature. At 193°C, it takes around 10-12 seconds. That is twice as fast as the Solo 2 (30 seconds).

What is the difference between Session mode and On-Demand mode? +

In Session mode, you get a continuous 5-20-minute session at a constant temperature. In On-Demand mode, you start each inhalation individually – the device heats up, you draw, then it cools down. On-Demand preserves your material between draws.

How many draws do I get from one load? +

With an XL stem at 193°C, you get 4-6 strong draws in Session mode. In On-Demand mode, it is 2-5 draws per load, depending on the heat level. The regular stems hold about half that.

Can I use the XL stems with the Solo 2 as well? +

Technically yes, but it makes little sense. The Solo 2 heating chamber is shallower, so the herb in XL stems sits too close to the seal, where there is no heat. On the Solo 3, the chamber is deeper – XL stems work perfectly.

How long does the battery last? +

With 5.000 mAh, you get around 10 sessions per charge. That is comparable to the Storz & Bickel Venty and is in the upper tier among portables. The battery is replaceable, and a spare battery doubles the runtime.

Which temperature is best? +

193°C (380°F) is the sweet spot according to users and reviews. Below that, the AVB stays just brown; above it, the bottom turns blackish. At 193°C, you get maximum flavour, dense clouds and clean AVB.

Can I use the Solo 3 with a water pipe? +

Yes, two WPA stems (regular + XL) are included. They fit 14mm bubblers. The display rotates automatically when you turn the device upside down. On-Demand mode is ideal for water pipes.

How do I clean the glass stems? +

Empty the stems immediately after the session while they are still warm. Clean the screen holes with a brush. For deeper cleaning: soak the stems in isopropyl alcohol, then rinse with warm water.

Is the Solo 3 pocket-friendly? +

To a degree. At 210g and 11,5cm tall, it is larger than the Solo 2. It fits in roomy trouser pockets, but not really in tight ones. For travelling, a bag or jacket is better. The larger build was necessary for the deeper chamber and the bigger battery.

Can I vape while charging? +

Yes, pass-through charging is supported. You can keep the Solo 3 plugged in via USB-C and use it at the same time. It is not the best thing for the battery, but it works.

What does 80/20 hybrid heating mean? +

80% of the heating is done by convection (hot air while drawing), 20% by conduction (contact with the warm glass). The conduction keeps the glass preheated, while convection extracts during the draw. That is the ideal balance.

How much herb fits in the stems? +

The regular stems hold about 0.1g, while the XL stems hold about 0.2g. The XL version has double the capacity and accordingly delivers more vapour and effect per session.

Solo 3 V2 FAQ

How long is the Solo 3 heat-up time?
The Solo 3 heats up in 5-15 seconds, depending on the target temperature. At 193°C, it takes around 10-12 seconds. That is twice as fast as the Solo 2 (30 seconds).
What is the difference between Session mode and On-Demand mode?
In Session mode, you get a continuous 5-20-minute session at a constant temperature. In On-Demand mode, you start each inhalation individually – the device heats up, you draw, then it cools down. On-Demand preserves your material between draws.
How many draws do I get from one load?
With an XL stem at 193°C, you get 4-6 strong draws in Session mode. In On-Demand mode, it is 2-5 draws per load, depending on the heat level. The regular stems hold about half that.
Can I use the XL stems with the Solo 2 as well?
Technically yes, but it makes little sense. The Solo 2 heating chamber is shallower, so the herb in XL stems sits too close to the seal, where there is no heat. On the Solo 3, the chamber is deeper – XL stems work perfectly.
How long does the battery last?
With 5.000 mAh, you get around 10 sessions per charge. That is comparable to the Storz & Bickel Venty and is in the upper tier among portables. The battery is replaceable, and a spare battery doubles the runtime.
Which temperature is best?
193°C (380°F) is the sweet spot according to users and reviews. Below that, the AVB stays just brown; above it, the bottom turns blackish. At 193°C, you get maximum flavour, dense clouds and clean AVB.
Can I use the Solo 3 with a water pipe?
Yes, two WPA stems (regular + XL) are included. They fit 14mm bubblers. The display rotates automatically when you turn the device upside down. On-Demand mode is ideal for water pipes.
How do I clean the glass stems?
Empty the stems immediately after the session while they are still warm. Clean the screen holes with a brush. For deeper cleaning: soak the stems in isopropyl alcohol, then rinse with warm water.
Is the Solo 3 pocket-friendly?
To a degree. At 210g and 11,5cm tall, it is larger than the Solo 2. It fits in roomy trouser pockets, but not really in tight ones. For travelling, a bag or jacket is better. The larger build was necessary for the deeper chamber and the bigger battery.
Can I vape while charging?
Yes, pass-through charging is supported. You can keep the Solo 3 plugged in via USB-C and use it at the same time. It is not the best thing for the battery, but it works.
What does 80/20 hybrid heating mean?
80% of the heating is done by convection (hot air while drawing), 20% by conduction (contact with the warm glass). The conduction keeps the glass preheated, while convection extracts during the draw. That is the ideal balance.
How much herb fits in the stems?
The regular stems hold about 0.1g, while the XL stems hold about 0.2g. The XL version has double the capacity and accordingly delivers more vapour and effect per session.

Commentaires

Aucun commentaire. Soyez le premier !

Alerte de prix: Solo 3 V2

Actuellement à partir de 120,54€
Actuellement à partir de 120,54€ — max. 119,54€

Vous recevrez un e-mail de confirmation.

Chargement...
Retour en haut