Veelgestelde vragen
With conduction, material is heated through direct contact with a hot surface. With convection, hot air flows through the material. Convection is considered more efficient and flavorful.
For optimal performance, we recommend light cleaning after each session and thorough cleaning with isopropyl alcohol every 1-2 weeks.
170-185 °C for light vapor, 185-200 °C for balanced effects, 200-210 °C for maximum extraction. Start low and work your way up.
The Modul is designed exclusively for the <strong>Stundenglass Gravity Infuser</strong> and the <strong>Stundenglass Kompact</strong>. It cannot be used as a standalone vaporizer without one of these base units.
The Modul comes with two quartz tanks: one for <strong>dry herb</strong> and one for <strong>concentrates</strong> (waxes, oils). The tanks swap out in seconds.
Between <strong>15 and 45 seconds</strong> depending on the target temperature. The 2.4-inch display shows both actual and target temperature, so you can see exactly when it's ready.
The <strong>6000 mAh battery</strong> is rated for up to <strong>50 sessions per charge</strong>. Actual results vary based on temperature and session length. Charges via USB-C with passthrough support.
Yes. The Modul supports <strong>passthrough charging</strong> — it continues operating while connected to USB-C.
From <strong>200 to 500°C</strong> (392–932°F), adjusted steplessly via the single-hand dial on the color display.
The housing is <strong>anodized aluminum</strong> — lightweight, durable, and corrosion-resistant. The heating chambers are quartz glass.
Remove the tanks from the module and soak in <strong>isopropyl alcohol (90%+)</strong>. After soaking, wipe out with a cotton swab and rinse with clean water. Regular cleaning keeps the flavour fresh.
The dry herb tank heats at up to <strong>80 watts</strong>. The concentrate tank runs at lower power levels. The Modul adjusts output automatically based on the selected temperature.
Stundenglass provides a <strong>2-year warranty</strong> on the Modul covering manufacturing defects and material faults.









Reacties
Nog geen reacties. Wees de eerste!
Log in om te reageren