QaromaShop Taroma 360
Vantagens
- Fluxo de ar de 360° pela câmara ball vape para extração uniforme
- Até 399 °C de convecção pura, sob demanda
- Esferas de rubi para alta retenção de calor
- Compatível com pipes de água padrão
Desvantagens
- Preço em torno de €424, não é barato
- Requer alimentação pela tomada
- Pipe de água necessária, vendida separadamente
QaromaShop Taroma 360 — Comparação de Preços (5 lojas) 354–499 €
Atualizado: 18/04/2026, 18:35
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
Specifications
| Specifications | |
|---|---|
| Heating Method | Convecção |
| Device Type | Ball Vape |
| Brand | QaromaShop |
| Power Source | Energia AC |
| Temperature Range | 191°C - 254°C |
| Heat-up Time | 180 seconds |
| Warranty | 99 years |
| Water Pipe | Ver adaptadores para bong de água |
| Session Mode | Sob demanda |
| Temperature Control | Digital |
| Material | Ervas Secas |
| Vapor Path | Metal |
| Replaceable Battery | No |
| Passthrough Charging | No |
| Charging Port | AC |
Fonte: OfficialOficial, OfficialOficial · Verificado 18.02.2026
Sobre este vaporizador
The Taroma 360 is QaromaShop's compact ball vaporizer, built around the same titanium ball convection system as their larger Taroma 3.0 but in a smaller footprint. It runs on AC power via a standard e-nail controller, which gives you very precise temperature regulation across a range of 191 to 254°C. That range covers a lot of ground — from light, flavor-focused hits at the lower end to thick, full extraction at the top.
Heat-up takes around three minutes, which is normal for ball vapes. The titanium balls need time to reach a stable temperature before convection becomes truly even. It's not a quick-session device in the way a portable is, but once it's up to temperature, the consistency is hard to match. Ball vaporizers are slow to start and exceptionally smooth once going — that's just the nature of the format.
Dosing capsule support is a practical bonus. Loading capsules rather than packing the chamber directly keeps things clean and makes back-to-back sessions easy to manage without tools. Water pipe compatibility is built into the design, which is standard for ball vapes — most users run these setups through a rig or bong, and the Taroma 360 is built with that in mind.
QaromaShop backs the 360 with a lifetime warranty, which is about as confident a statement about build quality as you can make. For anyone who already appreciates the ball vape format and wants something smaller than the 3.0, this is a well-considered option with serious vapor quality and long-term reliability built in.
- Fluxo de ar de 360° pela câmara ball vape para extração uniforme
- Até 399 °C de convecção pura, sob demanda
- Esferas de rubi para alta retenção de calor
- Compatível com pipes de água padrão
- Preço em torno de €424, não é barato
- Requer alimentação pela tomada
- Pipe de água necessária, vendida separadamente
The Taroma 360 by QaromaShop is one of the original ball vapes that kicked off the desktop revolution. Hot air flows through ruby or SiC balls in a 360-degree airflow design, delivering pure convection heating up to 254 °C via a precise PID controller. Designed for stationary use – ideally through a water pipe – this AC-powered desktop is built for serious sessions. Compare prices in our Taroma 360 price comparison.
Ball vape basics: why heated balls matter
Around 200 small ruby or silicon carbide balls sit inside the Taroma 360 heater core. They store thermal energy and release it to the air as you draw. The result: even heat distribution that extracts material thoroughly without combustion. Unlike standard heating elements, the temperature stays stable even during fast, hard pulls. The balls act as a thermal buffer – after 10 consecutive draws, the temp barely drops.
Research context: A study in the Journal of Pharmaceutical Sciences (Hazekamp et al., 2006) showed that vaporisation at controlled temperatures releases over 95% of target compounds while largely avoiding combustion by-products. Source: PubMed 16637053
360-degree airflow and PID control
The 360-degree design routes air from all sides through the ball field. No dead spots, no hot spots. The PID controller holds the set temperature within ±1 °C – far more accurate than basic dial controllers. In practice, draw number one tastes as good as draw number twenty. Heat-up takes roughly 2–3 minutes depending on target temp.
Dosing capsules and water filtration
The Taroma 360 supports dosing capsules for easier loading and cleaner sessions. Fill the capsule, drop it in, vape, remove. For the full experience, most users pair it with a water pipe. The 14mm or 18mm joint fits standard glass adapters. Ball vape heat plus water filtration equals smooth, cool vapor that is easy on the throat.
Build and materials
QaromaShop builds the Taroma 360 in Malaysia. The body is solid wood, the heater core stainless steel. Ruby and SiC balls are food-grade and virtually indestructible. Total weight sits around 1.5 kg – clearly a stay-at-home device. The finish is handcrafted rather than factory-polished, which fits the brand identity.
360-Degree Convection
The Taroma 360 pushes hot air evenly from all sides through the material. This 360-degree convection extracts compounds efficiently since no area goes untouched. Max temperature sits at 254 °C.
Elev8 Glass Gallery designed the Taroma as an open heating element paired with interchangeable glass attachments. Whip, direct draw, or water pipe -- the heater stays the same. This modularity sets it apart from closed desktop systems.
Quais cápsulas de dosagem e acessórios estão disponíveis?
The Taroma 360 supports dosing capsules for easy loading and clean chambers. Fill capsules ahead of time, insert, and swap after each session.
Accessories include glass whips, various bowls, and WPA adapters for water pipes. All-glass vapor path means pure flavor with no plastic or metal taste. Isopropanol handles cleaning.
360-Degree Ball Vape Airflow
What sets the Taroma 360 apart from other ball vapes is the radial airflow path. Instead of pulling air through a single channel over the heating element, the 360 design routes your draw around the entire circumference of the ball array. This means the herb is heated from every direction at once rather than just from one side. The result is more even extraction per hit and less stirring between draws. Users who switched from top-down ball vapes often notice they get an extra cycle or two from the same bowl before the material is spent.
FAQ
Official Resources
Mais vaporizadores QaromaShop 4
Vaporizadores semelhantes 5
Comparações lado a lado 1
Acessórios Compatíveis
Comentários
Ainda sem comentários. Seja o primeiro!
Entre para comentar